Showing 1–12 of 15 results
Emergency Spare Stay Kit Modern high-strength synthetic rigging makes it possible to carry a dependable emergency stay without storing heavy coils of spare wire onboard. Our Emergency Spare Stay Kit provides a compact, adaptable solution designed to get you safely underway again after rigging damage offshore. Each kit uses New England Ropes V12 single-braid Vectran…
The boom preventer is a traditional & highly effective system that can, if rigged properly, leave your deck clutter free. The preventer, unlike the boom brake, is to be rigged to the very outboard end of the boom via a pad eye and pendant. Many “new and improved” preventer systems exist in plan form and…
Whisker poles, while quite useful, can be a challenge to work with and store when not in use. Our on-the-mast pole systems allow the pole to be worked with easily from the mast, and allow for the pole to be stored vertically on the mast when not in use. The outboard (jaw) end of the…
This kit is designed to easily retrofit an existing multihull with no bowsprit to one that has a bowsprit to improve downwind performance using reaching spinnakers and drifter sails. Each sprit is specifically sized to match the boat and can be rigged for use with continuous line furling systems or custom configurations. With certain installations…
Read our blog post about boom vangs here! Forespar Yacht Rod rigid vang systems are fabricated from aluminum & polished stainless steel, with a white powdercoat finish. Return force is provided by an internal hardened stainless steel spring; a fast-pin adjustment allows the spring force to be adjusted on the fly. No hydraulic systems to…
Halyard restrainers prevent the halyard from wrapping around the foil on boats where the swivel isn’t mounted near the masthead. Small: Sheave dia: 15/16″ – 25mm Fasteners: #10 RH in – 5 RH mm For Harken furling unit: 0, 1, 1.5 Large: Sheave dia: 1-1/4″ – 31mm Fasteners: #10 RH in – 5 RH mm…
Harken clevis pin swivel snap shackles can be pinned onto a furling drum or top swivel for sail tack or head attachment, respectively. Snap shackle facilitates quick sail changes.
Holt Snatch Blocks quickly capture spinnaker sheets or guy lines while racing to change a lead angle; they also work well as continuous furler or code zero line take-ups. Sheaves are made of acetal resin, cheeks are glass-filled nylon, and the axle is 316 Stainless Steel.
Halyard restrainers prevent the halyard from wrapping around the foil on boats where the swivel isn’t mounted near the masthead. Small: For lines up to 3/8″ – 10mm Fasteners: 2x #10 RH in – 5 RH mm For furling unit: 0, 1, 1.5 Large: For lines up to 5/8″ – 16mm Fasteners: 4x #10 RH…
Selden torsion cable thimbles have an integrated pin, allowing them to securely pin into furler drums & swivels. They are designed to be used with Selden’s torsion cable. Cable Clamps are required in combination with a thimble to properly terminate a torsion cable. Sold as a 2-pack so you have a thimble for each end.
The Taylor Made spreader boot is best designed for round spreader sections. They are made from UV resistant synthetic rubber and are designed to easily fit over existing stays and spreader ends. Sold in pairs of 2. Small: 1/2″ to 1-1/2″ dia spreaders Medium: 1″ to 2″ dia spreaders Large: 2″ to 3″ dia spreaders
These spreader boots are designed to fit over most aerofoil-shaped spreaders. Soft injection-moulded UV-resistant synthetic rubber. Sold in pairs, secured with rigging tape (sold separately). Medium: Fits spreader tips approximately 2-1/4″ x 11/16″, wire size up to 3/16″ Large: Fits spreader tips approximately 3-1/4″ x 1″, wire size up to 1/4″
No products in the cart.
|
Uploaded
Failed
|
 |