Product Vendor -

Product Unit Type -

Product Sheave Size -

Product Block Type -

Product Line Type -

Product Rope Size -

Product Color -

Product Hydraulic Adjuster Type -

Product Wire Rigging Type -

Product Standing Rigging Part -

Product Lifeline Fitting Style -

Product Lifeline Fitting Type -

Product Wire Size -

Product Pin Diameter -

Product Furler Type Sub Category -

Product Adjuster Length -

Product Poles-Sprits Materials -

Product Traveler Part -

Product Traveler Type -

Product Track Size -

Showing all 14 results

  • Colligo torque Rope Receivers proudly sold by The Rigging Company

    Colligo Torque Rope Receivers

    $129.99 – $199.99

    For use with torque rope line for Code 0 and Spinnaker furling gear. One end fitting now replaces the thimble and clamp that was need for a proper termination before. Colligo Torque rope receivers are easy to install and can be removed and reinstalled to get the line length correct.  Not that any of us have…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Selden Adjustable Tack Swivel (ATS)

    $282.60 – $507.60
    : $314.00 – $564.00 (10 %)

    This accessory for Selden GX furlers enables the sailor to easily trim the luff of the gennaker. The Adjustable Tack Swivel slides up and down over the AT-cable and is handled from the cockpit with a down haul. As opposed to trimming the luff by slacking the halyard, the AT-cable can now be permanently tensioned…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Colligo Torque Rope (Anti-tortion cable) proudly sold by The Rigging Company

    Colligo Torque Rope (Anti-Torsion line)

    $4.40 – $18.00 foot
    : $4.86 – $19.90 (9 – 10 %)

    Colligo Torque ropes are for  luff lines for code zero style sails and torque lines for top down furled spinnakers.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden torsion cable clamp

    Colligo Tosion Cable Clamps

    $80.10 – $125.10
    : $89.00 – $139.00 (10 %)

    Colligo Torque Rope Clamps are designed for use with Code 0, gennaker, and spinnaker furlers that utilize a torsion cable. The clamps are easy to install and can be adjusted as needed. Works with all major furler models, sold per clamp. Note that for some furler systems, two clamps are recommended at one or both…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden continuous furling line

    Selden Continuous Furling Line

    $42.30 – $484.20
    : $47.00 – $538.00 (6 – 50 %)

    Selden continuous furling lines are a cover-dependent double braid polyester line. They come factory-spliced into a continuous loop, and have the option of being spliced into a Selden Twin Cam block. Length listed is the length of the loop on deck – e.g. a 4m rope length is an 8m length of rope spliced into…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Selden Low friction shackle

    $56.70 – $215.10
    : $63.00 – $239.00 (10 %)

    This snap shackle has a big, well rounded loop allowing the rope to slide with low friction and it can be used to tension a Selden CX with 2:1 purchase. This not only makes for better performance but it also makes it easier to connect the Selden CX to a bowsprit, from the foredeck. The…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden twin cam block

    Selden Twin Cam Block for Continuous Furling Lines

    $147.60 – $197.10
    : $164.00 – $219.00 (10 %)

    TECHNICAL FEATURES PBB 50 • Polymer sheave. • Stainless steel strap for strength and long service life. • Torsional rigid cheeks in glass fibre reinforced polymer to prevent jamming. • Sliding swivel locking mechanism.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden double stanchion fairlead

    Selden Double Stanchion Fairlead

    $108.90
    : $121.00 (10 %)

    The Selden double stanchion fairlead for continuous furling lines are designed to slide over 25-30mm (1 to 1-1/4″) stanchions and feature a spring-loaded metal bracket that can be opened to capture a continuous furling line without having to undo the splice in the line.

    Add to cartDone
  • Selden Dead-end Fitting

    Selden Dead-end Fitting

    $187.20 – $463.50
    : $208.00 – $515.00 (10 %)

    The Selden dead-end fitting is installed in the mast to serve as a termination strongpoint for 2:1 halyards. The fitting requires a cutout in the mast and is held in place with four fasteners that thread into the integrated backing plate.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden 2:1 Halyard Block

    2:1 Halyard Head Shackle

    $154.80 – $349.20
    : $172.00 – $388.00 (10 %)

    In order to achieve the desired performance of a top-down furling system when using a Code 0 or asymmetric spinnaker, the halyard load must be higher than what normal halyard boxes and stoppers can handle. Therefore, a 2:1 purchase is recommended to be used. The halyard is dead-ended at the mast (preferably with a swivel…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Selden Anti-Twist shackle

    $45.90 – $94.50
    : $51.00 – $105.00 (10 %)

    The Anti-Twist shackle is an optional shackle connecting the halyard to the halyard swivel. The long pin will lean against the mast and prevent a “soft” halyard from twisting. This shackle is not necessary for a 2:1 halyard set up nor is it for a high quality Dyneema® halyard.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Bracket for masthead rigs(Selden ONLY)

    $438.30
    : $487.00 (10 %)

    To allow for a Seldén GX system to be fitted to a mast head rig, the halyard must be moved forward to prevent conflict between the halyard swivel and the forestay. A mast head bracket with a smooth halyard lead solves the problem. This bracket is intended for gennakers/asymmetric spinnakers only and not Code 0’s….

    Add to cartDone
  • Selden Torsion Cable

    Selden Torsion Cables

    $265.50 – $1,645.20
    : $295.00 – $1,828.00 (10 %)

    Selden torsion cables are designed to be as rigid as possible to allow for quick, safe furling. When ordering a cable, be sure to order an appropriate length for your chosen furling system as many systems publish a maximum cable length.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden Torsion Cable Thimbles

    Selden Thimbles for Torsion Cables

    $72.90 – $96.30
    : $81.00 – $107.00 (10 %)

    Selden torsion cable thimbles have an integrated pin, allowing them to securely pin into furler drums & swivels. They are designed to be used with Selden’s torsion cable. Cable Clamps are required in combination with a thimble to properly terminate a torsion cable. Sold as a 2-pack so you have a thimble for each end.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page