Product Vendor -
Product Unit Type -
Product Sheave Size -
Product Block Type -
Product Line Type -
Product Line Diameter -
Product Color -
Product Hydraulic Adjuster Type -
Product Wire Rigging Type -
Product Standing Rigging Part -
Product Lifeline Fitting Style -
Product Lifeline Fitting Type -
Product Furler Type Sub Category -
Product Adjuster Length -
Product Poles-Sprits Materials -
Product Traveler Part -
Product Traveler Type -
Product Track Size -
Showing 1–12 of 19 results
-
-
Lead Block Kits (3)
-
Colligo Tosion Cable Clamps
Price range: $80.10 through $125.10:$89.00 – $139.00(10 %)Colligo Torque Rope Clamps are designed for use with Code 0, gennaker, and spinnaker furlers that utilize a torsion cable. The clamps are easy to install and can be adjusted as needed. Works with all major furler models, sold per clamp. Note that for some furler systems, two clamps are recommended at one or both…
Select options This product has multiple variants. The options may be chosen on the product page -
Selden Continuous Furling Line
Price range: $42.30 through $484.20:$47.00 – $538.00(6 – 50 %)Selden continuous furling lines are a cover-dependent double braid polyester line. They come factory-spliced into a continuous loop, and have the option of being spliced into a Selden Twin Cam block. Length listed is the length of the loop on deck – e.g. a 4m rope length is an 8m length of rope spliced into…
Select options This product has multiple variants. The options may be chosen on the product page -
Selden Twin Cam Block for Continuous Furling Lines
Price range: $147.60 through $203.40:$164.00 – $226.00(10 %)TECHNICAL FEATURES PBB 50 • Polymer sheave. • Stainless steel strap for strength and long service life. • Torsional rigid cheeks in glass fibre reinforced polymer to prevent jamming. • Sliding swivel locking mechanism.
Select options This product has multiple variants. The options may be chosen on the product page -
Selden Double Stanchion Fairlead
$108.90:$121.00(10 %)The Selden double stanchion fairlead for continuous furling lines are designed to slide over 25-30mm (1 to 1-1/4″) stanchions and feature a spring-loaded metal bracket that can be opened to capture a continuous furling line without having to undo the splice in the line.
-
Selden Dead-end Fitting
Price range: $187.20 through $463.50:$208.00 – $515.00(10 %)The Selden dead-end fitting is installed in the mast to serve as a termination strongpoint for 2:1 halyards. The fitting requires a cutout in the mast and is held in place with four fasteners that thread into the integrated backing plate.
Select options This product has multiple variants. The options may be chosen on the product page -
2:1 Halyard Head Shackle
Price range: $154.80 through $349.20:$172.00 – $388.00(10 %)In order to achieve the desired performance of a top-down furling system when using a Code 0 or asymmetric spinnaker, the halyard load must be higher than what normal halyard boxes and stoppers can handle. Therefore, a 2:1 purchase is recommended to be used. The halyard is dead-ended at the mast (preferably with a swivel…
Select options This product has multiple variants. The options may be chosen on the product page -
Colligo Standard Terminator Fittings for Synthetic Rigging
Price range: $71.10 through $224.10:$79.00 – $249.00(10 %)Colligo Terminator end fittings are the only spliceable, lashable, and pinnable end fittings available that meet Hampidjan’s recommended minimum 5/1 bending ratio for Dyneema. This is essential for long term durability of Dyneema-based lines, as tight bending radii can cause compressive stresses that weaken the line considerably. Clevis pin holes come with a bushing installed,…
Select options This product has multiple variants. The options may be chosen on the product page -
Harken Stanchion-Mount Lead Block Kit
$344.95:$431.15(20 %)Harken recommends equipping every system with Carbo lead blocks for safe furling from the cockpit. The 7404 kit’s lightweight, UV-stabilized Carbo blocks run exclusively on ball bearings for fast trimming under any load. It provides a complete system for most boats. Includes: 3x 7403 (29mm Outboard Stanchion-Mount Blocks) 1x 7402 (57mm Ratchet Stanchion-Mount Block) 1x…
-
Replacement Standing Rigging – 1×19 wire with Swaged Rigging Stud (RH)
Price range: $73.02 through $1,170.13:$85.90 – $1,376.62(15 %)Replacement Standing Rigging – One-Ended, Cut-to-Length, Ready for Sta-Lok or Hi-Mod Mechanical Fitting T316 Stainless Steel 1×19 wire rope with a Swaged Rigging Stud | Cut-to-Length in 5-ft Increments Why One-Ended Standing Rigging? When looking to purchase replacement standing rigging online, the hardest part is getting the final length exactly right — especially when installing…
Select options This product has multiple variants. The options may be chosen on the product page -
Replacement Standing Rigging – 1×19 wire with Swaged Marine Eye
Price range: $55.19 through $1,350.82:$64.93 – $1,589.20(15 %)Replacement Standing Rigging – One-Ended, Cut-to-Length, Ready for Sta-Lok or Hi-Mod Mechanical Fitting T316 Stainless Steel 1×19 wire rope with a Swaged Marine Eye | Cut-to-Length in 5-ft Increments Why One-Ended Standing Rigging? When looking to purchase replacement standing rigging online, the hardest part is getting the final length exactly right — especially when installing…
Select options This product has multiple variants. The options may be chosen on the product page -
Replacement Standing Rigging – 1×19 wire with Swaged Rigging Toggle
Price range: $73.68 through $853.84:$79.08 – $972.35(3 – 34 %)Replacement Standing Rigging – One-Ended, Cut-to-Length, Ready for Sta-Lok or Hi-Mod Mechanical Fitting T316 Stainless Steel 1×19 wire rope with a Swaged Rigging Toggle | Cut-to-Length in 5-ft Increments Why One-Ended Standing Rigging? When looking to purchase replacement standing rigging online, the hardest part is getting the final length exactly right — especially when installing…
Select options This product has multiple variants. The options may be chosen on the product page -
Replacement Standing Rigging – 1×19 wire with Swaged Marine Fork
Price range: $67.22 through $1,338.17:$79.08 – $1,574.32(15 %)Replacement Standing Rigging – One-Ended, Cut-to-Length, Ready for Sta-Lok or Hi-Mod Mechanical Fitting T316 Stainless Steel 1×19 wire rope with a Swaged Marine Fork | Cut-to-Length in 5-ft Increments Why One-Ended Standing Rigging? When replacing standing rigging, the hardest part is getting the final length exactly right — especially when installing a new furler or…
Select options This product has multiple variants. The options may be chosen on the product page