Showing 61–72 of 74 results
Utilizing the same features that have made the Hi-MOD Mechanical fittings popular, this insulator has an internal ball-socket in the main body that threads onto the connecting stud. The nut is insulated from the stainless steel body by a Tufnolâ„¢ socket, preventing electrical transference to the insulator body or opposite terminal. Should, for any reason,…
Comes with two plates and clevis pins. Larger sizes available upon request. Pin Dia. Min Lenth Max Length Part # 1/4″ 3/4″ 3-3/4″ 14EX 5/16″ 7/8″ 4-3/4″ 516EX 3/8″ 1″ 5″ 38EX 1/2″ 1-1/8″ 5-1/8″ 12EX
Hayn Marine toggles are made from a highly polished T316 Stainless Steel.
Highly polished 316 grade stainless steel. Designed to be used with closed body-style turnbuckles.
Highly polished 316 grade stainless steel. Retaining pin hole cross-drilled at end of thread. Designed to be used with open body-style turnbuckles.
Highly polished 316 grade stainless steel. Retaining pin hole cross-drilled at end of thread. Designed to be used with closed body-style turnbuckles.
Schaefer long link toggles replace the standard-length toggle provided with Schaefer headsail furlers. If an anchor roller & anchor are mounted such that the anchor & chain pass under the furling drum, a long link toggle should be used to raise the installed drum height off the deck to account for proper anchor clearance. Additional…
Schaefer Marine Double jaw toggles are used with the same pin sizes as marine eyes and mechanical end fittings on 1 x 19 stainless wire. These high quality stainless toggles permit proper “universal” motion in rigging applications to help reduce wire, rod and end fitting fatigue. Extra deep slot allows use in split masthead sheave…
Made of 316 Stainless steel, these high fatigue fittings are designed for use with corresponding pin sizes of swage or mechanical type marine eyes commonly used on 1 x 19 stainless wire. Extra deep strap designed to allow end to end assembly to Double jaw toggles.
Schaefer Marine triangle plates are designed to be used with the corresponding pin size of swage or mechanical type marine eyes commonly used with 1×19 stainless steel wire. Ideal for use with split backstays or triadic stays on ketch-rigged boats. Sold in pairs with three clevis pins and cotter pins included. “Stepped” plates feature a…
Schaefer link toggles are included with new Schaefer furlers and connect the furler drum & forestay to the forestay chainplate.
Hayn Marine Hi-Mod Twist Shackles — Marine Rigging Alignment Made Easy Hayn Marine Hi-Mod Twist Shackles are designed specifically for marine rigging applications where hardware must connect across different planes without introducing twist, side load, or unnecessary stress into sails, lines, or fittings. Featuring a 90-degree twist between the shackle body and pin, these shackles…
No products in the cart.