Showing 49–60 of 63 results
Hayn Marine turnbuckles feature an excellent combination of stainless steel and bronze, retaining the qualities of strength and corrosion resistance while adding an exceptional non-galling feature. All turnbuckle bodies are highly polished and chromed. Please note that sizes 7/8″, 1.0″ 1-1/8″, 1-1/4″ and 1-3/8″ are fully machined from bar material, not forged. All end fittings…
Hi-MOD Compression Fittings Produced by Petersen Stainless Rigging in the UK and distributed exclusively by Hayn Marine in the USA, the Hi-MOD mechanical terminal is the latest advancement in swageless fittings. These terminals have a unique crown ring that assures the wires stay evenly spaced around the fitting, eliminating the need to bend the wires,…
Hi-MOD Compression Fittings Produced by Petersen Stainless Rigging in the UK and distributed exclusively by Hayn Marine in the USA, the Hi-MOD mechanical terminal is the latest advancement in swageless fittings. These terminals have a unique crown ring that assures the wires stay evenly spaced around the fitting, eliminating the need to bend the wires,…
Hi-MOD Compression Fittings Produced by Petersen Stainless Rigging in the UK and distributed exclusively by Hayn Marine in the USA, the Hi-MOD mechanical terminal is the latest advancement in swageless fittings. These terminals have a unique crown ring that assures the wires stay evenly spaced around the fitting, eliminating the need to bend the wires,…
Comes with two plates and clevis pins. Larger sizes available upon request. Pin Dia. Min Lenth Max Length Part # 1/4″ 3/4″ 3-3/4″ 14EX 5/16″ 7/8″ 4-3/4″ 516EX 3/8″ 1″ 5″ 38EX 1/2″ 1-1/8″ 5-1/8″ 12EX
Highly polished 316 grade stainless steel. Designed to be used with closed body-style turnbuckles.
Highly polished 316 grade stainless steel. Retaining pin hole cross-drilled at end of thread. Designed to be used with open body-style turnbuckles.
Highly polished 316 grade stainless steel. Retaining pin hole cross-drilled at end of thread. Designed to be used with closed body-style turnbuckles.
Schaefer Marine Double jaw toggles are used with the same pin sizes as marine eyes and mechanical end fittings on 1 x 19 stainless wire. These high quality stainless toggles permit proper “universal” motion in rigging applications to help reduce wire, rod and end fitting fatigue. Extra deep slot allows use in split masthead sheave…
Made of 316 Stainless steel, these high fatigue fittings are designed for use with corresponding pin sizes of swage or mechanical type marine eyes commonly used on 1 x 19 stainless wire. Extra deep strap designed to allow end to end assembly to Double jaw toggles.
Schaefer Marine triangle plates are designed to be used with the corresponding pin size of swage or mechanical type marine eyes commonly used with 1×19 stainless steel wire. Ideal for use with split backstays or triadic stays on ketch-rigged boats. Sold in pairs with three clevis pins and cotter pins included. “Stepped” plates feature a…
Hayn Marine Hi-Mod Twist Shackles — Marine Rigging Alignment Made Easy Hayn Marine Hi-Mod Twist Shackles are designed specifically for marine rigging applications where hardware must connect across different planes without introducing twist, side load, or unnecessary stress into sails, lines, or fittings. Featuring a 90-degree twist between the shackle body and pin, these shackles…
No products in the cart.