Showing 1–16 of 20 results
Designed for 5/32″ Dyneema and with a 5/16″ pin, this fitting gives you the adjustability of a turnbuckle with the weight savings of synthetic lifeline rigging. Blue Wave rope end fittings are a new innovation allowing anyone with splicing knowledge to use synthetic line in places where previously only wire could be used due to…
C. Sherman Johnson lifeline fittings are the ultimate in strength, durability and aesthetics, giving you complete peace of mind. Standard duty life line fittings match the strength of 7×7 or 1×19 wire*. A check nut locks the turnbuckle in place. Stamped, strap design turnbuckle with knurled nut for adjustment. *NOTE: Hand Crimp terminals, when properly…
C. Sherman Johnson lifeline fittings are the ultimate in strength, durability and aesthetics, giving you complete peace of mind. Standard duty life line fittings match the strength of 7×7 or 1×19 wire*. A check nut locks the turnbuckle in place. *NOTE: Hand Crimp terminals, when properly applied, are approximately 65-70% of 7×7 wire strength. While…
C. Sherman Johnson lifeline fittings are the ultimate in strength, durability and aesthetics, giving you complete peace of mind. Standard duty life line fittings match the strength of 7×7 or 1×19 wire*. A check nut locks the turnbuckle in place. *NOTE: Hand Crimp terminals, when properly applied, are approximately 65-70% of 7×7 wire strength. While…
C. Sherman Johnson lifeline fittings are the ultimate in strength, durability and aesthetics, giving you complete peace of mind. Â Standard duty life line fittings match the strength of 7×7 or 1×19 wire*. 1/4″ wire size uses 7/32″ swage die. This “T” bolt style fitting is used on decks or bulkheads. Toggle nut style also available…
C. Sherman Johnson lifeline fittings are the ultimate in strength, durability and aesthetics, giving you complete peace of mind. Â Standard duty life line fittings match the strength of 7×7 or 1×19 wire*. Forged silicon bronze body with T-316 stainless ends. 1/4″ wire-5/16″ pin size uses 7/32″ swage die. *NOTE: Hand Crimp terminals, when properly applied,…
C. Sherman Johnson lifeline fittings are the ultimate in strength, durability and aesthetics, giving you complete peace of mind. Â Standard duty life line fittings match the strength of 7×7 or 1×19 wire. Unique design features a slot with wraparound rings which fit through a cross-hole in terminal for secure locking.
Johnson Marines new Splice Line Fittings allow you to easily splice hi tech Dyneema line to standard lifeline fittings. Machined out of 6061-T6 Aluminum and then hard anodized. Designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema / Spectra life lines for offshore racing and Dyneema/Spectra…
Johnson Marines new Splice Line Fittings allow you to easily splice hi tech Dyneema line to standard lifeline fittings. Machined out of 6061-T6 Aluminum and then hard anodized. Designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema / Spectra life lines for offshore racing and Dyneema/Spectra…
Johnson Marines new Splice Line Fittings allow you to easily splice hi tech Dyneema line to standard lifeline fittings. Machined out of 6061-T6 Aluminum and then hard anodized. Designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema / Spectra life lines for offshore racing and Dyneema/Spectra…
Johnson Marines new Splice Line Fittings allow you to easily splice hi tech Dyneema line to standard lifeline fittings. Machined out of 6061-T6 Aluminum and then hard anodized. Designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema / Spectra life lines for offshore racing and Dyneema/Spectra…
Hayn lifeline adjusters are made from 316 Stainless Steel. All adjusters have a 1/4″ clevis pin regardless of wire size. A- Jaw Depth: 1″ E- Jaw Gap: 5/16″
Hayn lifeline adjusters are made from 316 Stainless Steel. All adjusters have a 1/4″ clevis pin and 1/4-28 RH threads regardless of wire size. O- Open Length: 7-3/8″ C- Closed Length: 5-1/4″ A- Jaw Depth: 1-5/16″ E- Jaw Gap: 5/16″
Hayn lifeline turnbuckles are T316 Stainless Steel and are polished to a mirror finish. Standard duty life line fittings match the strength of 7×7 or 1×19 wire. A deck toggle can be used wherever a cable needs to be terminated to a deck or bulkhead. 1/4″ wire fitting uses 7/32″ swage die. Pin diameter refers…
Hayn lifeline turnbuckles are T316 Stainless Steel and are polished to a mirror finish. Standard duty life line fittings match the strength of 7×7 or 1×19 wire. A check nut locks the turnbuckle in place. 1/4″ wire fitting uses 7/32″ swage die.
Hayn lifeline turnbuckles are T316 Stainless Steel and are polished to a mirror finish. Standard duty life line fittings match the strength of 7×7 or 1×19 wire. A check nut locks the turnbuckle in place. 1/4″ wire fitting uses 7/32″ swage die.
No products in the cart.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
