Product Vendor -

Product Unit Type -

Product Sheave Size -

Product Block Type -

Product Line Type -

Product Rope Size -

Product Color -

Product Hydraulic Adjuster Type -

Product Wire Rigging Type -

Product Standing Rigging Part -

Product Lifeline Fitting Style -

Product Lifeline Fitting Type -

Product Wire Size -

Product Pin Diameter -

Product Furler Type Sub Category -

Product Adjuster Length -

Product Poles-Sprits Materials -

Product Traveler Part -

Product Traveler Type -

Product Track Size -

Showing all 11 results

  • Selden torsion cable clamp

    Colligo Tosion Cable Clamps

    $80.10$125.10
    : $89.00$139.00 (10 %)

    Colligo Torque Rope Clamps are designed for use with Code 0, gennaker, and spinnaker furlers that utilize a torsion cable. The clamps are easy to install and can be adjusted as needed. Works with all major furler models, sold per clamp. Note that for some furler systems, two clamps are recommended at one or both…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Selden continuous furling line

    Selden Continuous Furling Line

    $37.80$440.10
    : $42.00$489.00 (10 %)

    Selden continuous furling lines are a cover-dependent double braid polyester line. They come factory-spliced into a continuous loop, and have the option of being spliced into a Selden Twin Cam block. Length listed is the length of the loop on deck – e.g. a 4m rope length is an 8m length of rope spliced into…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Selden twin cam block

    Selden Twin Cam Block for Continuous Furling Lines

    $143.10$197.10
    : $159.00$219.00 (10 %)
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Selden double stanchion fairlead

    Selden Double Stanchion Fairlead

    $105.30
    : $117.00 (10 %)

    The Selden double stanchion fairlead for continuous furling lines slide over 25-30mm (1 to 1-1/4″) stanchions and feature a spring-loaded metal bracket that can be opened to capture a continuous furling line without having to undo the splice in the line.

  • Selden Dead-end Fitting

    Selden Dead-end Fitting

    $170.10$421.20
    : $189.00$468.00 (10 %)

    The Selden dead-end fitting is installed in the mast to serve as a termination strongpoint for 2:1 halyards. The fitting requires a cutout in the mast and is held in place with four fasteners that thread into the integrated backing plate.

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Selden 2:1 Halyard Block

    2:1 Halyard Head Shackle

    $154.80$349.20
    : $172.00$388.00 (10 %)

    In order to achieve the desired performance of a top-down furling system when using a Code 0 or asymmetric spinnaker, the halyard load must be higher than what normal halyard boxes and stoppers can handle. Therefore, a 2:1 purchase is recommended to be used. The halyard is dead-ended at the mast (preferably with a swivel…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Colligo Standard Terminator

    Colligo Standard Terminator Fittings for Synthetic Rigging

    $71.10$224.10
    : $79.00$249.00 (10 %)

    Colligo Terminator end fittings are the only spliceable, lashable, and pinnable end fittings available that meet Hampidjan’s recommended minimum 5/1 bending ratio for Dyneema. This is essential for long term durability of Dyneema-based lines, as tight bending radii can cause compressive stresses that weaken the line considerably. Clevis pin holes come with a bushing installed,…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • HARKEN REFLEX furling system

    Harken Reflex Furling System for Asymmetric Spinnakers

    $2,459.70$6,495.71
    : $2,733.00$7,217.45 (10 %)

    Originally built for Volvo 60s, Code Zero furlers are used with free-flying asymmetrical headsails and staysails. Suitable for boats up to 21 m (70 ft), they tame Code Zero sails, screechers, Gennakers®, and staysails. The Harken Reflex furling system is a game changer! The previous generation of free-flying sail furlers often resulted in partial or…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • HARKEN REFLEX furling system

    Harken Reflex Furling System for Code Zero Sails

    $1,552.14$4,136.99
    : $1,724.60$4,596.65 (10 %)

    Originally built for Volvo 60s, Code Zero furlers are used with free-flying asymmetrical headsails and staysails. Suitable for boats up to 21 m (70 ft), they tame Code Zero sails, screechers, Gennakers®, and staysails. The Harken Reflex furling system is a game changer! The previous generation of free-flying sail furlers often resulted in partial or…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Selden Torsion Cable

    Selden Torsion Cables

    $265.50$1,645.20
    : $295.00$1,828.00 (10 %)

    Selden torsion cables are designed to be as rigid as possible to allow for quick, safe furling. When ordering a cable, be sure to order an appropriate length for your chosen furling system as many systems publish a maximum cable length.

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Selden Torsion Cable Thimbles

    Selden Thimbles for Torsion Cables

    $72.90$96.30
    : $81.00$107.00 (10 %)

    Selden torsion cable thimbles have an integrated pin, allowing them to securely pin into furler drums & swivels. They are designed to be used with Selden’s torsion cable. Cable Clamps are required in combination with a thimble to properly terminate a torsion cable. Sold as a 2-pack so you have a thimble for each end.

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page