Showing all 9 results
Hydraulic vangs change the height of the boom to help control sail shape. They also function as a topping lift to hold the boom up when reefing, and to keep it level when the sail is flaked. Harken offers a full range of vang cylinders. The HYCV single-acting gas return is the standard vang used…
Harken’s integral hydraulic backstay adjuster provides the power to optimize sail shape quickly. the cylinder features a built-in, double-acting pump that delivers oil when the handle is both pushed and pulled. This moves oil through the system twice as fast as single-acting pumps on other integrals. Assemblies include a hardcoat-anodized aluminum cylinder and pump, vale,…
Navtec’s Series 850 Vang features an extra-large piston rod to resist buckling with no tackle to clutter the deck layout. It also provides boom lift in light airs and acts as a topping lift when the sail is flaked. The A850 can be integrated with an A440 Push Button Quick Release Valve, proving the ability…
Ergonomics meets economics. The new Navtec Series 9 Integral incorporates several key design features while keeping to the high marine standard that Navtec is known for. The Series 9 design moves the hydraulic feed tube inside to give the unit a sleek look. The pump piston size has been increased to 1/2″ to increase flow,…
Minimal weight. Minimal windage. Maximum reliability. Navtec standard cylinder rods are made from 316 stainless steel. Tubes, lower clevis and caps are made of black hard-coated aluminum. Cylinder bores are specially polished for longer seal life. Navtec stainless steel cylinders represent the highest standard of performance worldwide, with 316 stainless construction throughout. Standard, Long, and…
SAILTEC manufactures boom vangs in the same manner as hydraulic cylinders. The boom vang has a nitrogen return system and if sized properly will support the weight of the boom, eliminating the need for a topping lift. – Tension is 5000 psi or 350 bar – Return force is at 500 psi or 35 bar…
SAILTEC was one of the first companies to combine a hydraulic cylinder with a small hydraulic pump commonly known as an Integral. For almost 30 years SAILTEC has manufactured and improved the Integral. This proven Integral hydraulic adjuster now features a low profile hydraulic pressure gauge mounted at top of cylinder tube. The top mount…
SAILTEC has designed its cylinders to be reliable, long-lasting, and efficient. SAILTEC has done this by using high-strength aluminum alloys and advanced manufacturing techniques. SAILTEC also uses Molyguard bearings on the piston and the upper end to ensure cylinder and piston rod scoring does not occur while under side load. SAILTEC cylinders are available in…
SAILTEC has designed its cylinders to be reliable, long-lasting, and efficient. SAILTEC has done this by using high-strength aluminum alloys and advanced manufacturing techniques. SAILTEC also uses Molyguard bearings on the piston and the upper end to ensure cylinder and piston rod scoring does not occur while under side load. SAILTEC cylinders are available in…
No products in the cart.
|
Uploaded
Failed
|
 |