Showing 457–468 of 921 results
Harken pinstop end controls secure your traveler car on the track and are adjustable, allowing the range of the traveler to be adjusted on the fly. Use with Harken 22mm Low-Beam Pinstop Track. Length: 1-5/8″ Width: 1-3/8″ Height above track: 13/16″
Harken pinstop end controls secure your traveler car on the track and are adjustable, allowing the range of the traveler to be adjusted on the fly. Use with Harken 27mm Low-Beam Pinstop Track. Length: 2-5/16″ Width: 1-15/16″ Height above track: 1-5/16″
Harken pinstop end controls secure your traveler car on the track and are adjustable, allowing the range of the traveler to be adjusted on the fly. Use with Harken 22mm Low-Beam Pinstop Track. Length: 3-1/2″ Width: 1-15/16″ Height: 2-3/8″ Max Working Load: 1984lbs Breaking Load: 3968lbs
Harken pinstop end controls secure your traveler car on the track and are adjustable, allowing the range of the traveler to be adjusted on the fly. Use with Harken 32mm Low-Beam Pinstop Track. Length: 2-9/16″ Width: 2-1/4″ Height above track: 1-5/16″
Harken pinstop end controls secure your traveler car on the track and are adjustable, allowing the range of the traveler to be adjusted on the fly. This pinstop plunger is threaded so the adjuster pin can be threaded closed to secure the stop in place. Use with Harken 32mm Low-Beam Pinstop Track. Length: 2-1/2″ Width:…
Harken pinstop end controls secure your traveler car on the track and are adjustable, allowing the range of the traveler to be adjusted on the fly. Use with Harken 32mm Low-Beam Pinstop Track. Length: 4-7/16″ Width: 2-1/4″ Height above track: 1-27/32″ Max Working Load: 3500lbs
Harken recommends equipping asymmetric/code zero furling systems with lead blocks for safe furling from the cockpit. Lightweight, UV-stabilized Carbo blocks run exclusively on ball bearings for fast trimming under any load. Furling leads are offered separately or in complete kits. A Carbo T2 block with shockcord attaches aft of the double cam to keep line…
Harken recommends equipping asymmetric/code zero furling systems with lead blocks for safe furling from the cockpit. Lightweight, UV-stabilized Carbo blocks run exclusively on ball bearings for fast trimming under any load. Two stanchion leads forward guide line outboard to keep sidedecks clear. A stanchion lead aft features a double Harken Cam-Matic for cleating continuous furling…
Originally built for Volvo 60s, Code Zero furlers are used with free-flying asymmetrical headsails and staysails. Suitable for boats up to 21 m (70 ft), they tame Code Zero sails, screechers, Gennakers®, and staysails. The Harken Reflex furling system is a game changer! The previous generation of free-flying sail furlers often resulted in partial or…
Originally built for Volvo 60s, Code Zero furlers are used with free-flying asymmetrical headsails and staysails. Suitable for boats up to 21 m (70 ft), they tame Code Zero sails, screechers, Gennakers®, and staysails. The Harken Reflex furling system is a game changer! The previous generation of free-flying sail furlers often resulted in partial or…
Originally built for Volvo 60s, Code Zero furlers are used with free-flying asymmetrical headsails and staysails. Suitable for boats up to 21 m (70 ft), they tame Code Zero sails, screechers, Gennakers®, and staysails. The Harken Reflex furling system is a game changer! The previous generation of free-flying sail furlers often resulted in partial or…
Originally built for Volvo 60s, Code Zero furlers are used with free-flying asymmetrical headsails and staysails. Suitable for boats up to 21 m (70 ft), they tame Code Zero sails, screechers, Gennakers®, and staysails. The Harken Reflex furling system is a game changer! The previous generation of free-flying sail furlers often resulted in partial or…
No products in the cart.