Products and Services



We offer a full line of Rigging Products and Services, including but not limited to:

  • Complete Rigging Inspections for Insurance and General Survey
  • Deck Hardware Layout and Installation

Enjoy these links from our favorite rigging hardware manufacturers:

BSI Denmark. BSI rod rigging. The Better Navtec

Johnson Marine Annapolis Riggers
  VISIT NEW NEW ENGLAND ROPESsamson ropes sailboat rigger annapolis maryland

lewmar winchesSailtec Hydraulics Annapolis  Ronstan rigging companyspinlock rope clutchesHall Spars Quick VangMarlow ropes at the rigging Company

forespar lesiure furl sailboat rigger annapolis marylandharken usa sailboat rigger
Stalok mechanical fittings at the rigging company
Hood Furlers at the rigging company
hayn marine sailboat rigger annapolis maryland
Andersen winches anderson at the rigging company
Navtec rigging solutions

40 thoughts on “Products and Services

  1. Hello I have a 32’ sailboat mast been snap off I the last hurricane need mast stroud the whole work don’t know the make or model plate missing can you help me

  2. I am replacing the standing rigging on a C&C 30. All of it used STA LOK terminals, except the old Harken MK2 furler, which has swaged fittings on both ends. I was able to do all of the STA LOK, but need to find somebody that can swage the furler wire. I have the wite, but can you guys provide the fittings and swage them? Any suggestions on how I would transport a 40′ furler to you? The wire doesn’t come out with the fittings on the ends.

  3. I am looking for a stoboo gooseneck. Any ideas of where I can get one? And what would it cost?

  4. Hello. I have a need to replace a portion of standing rigging. Do I remove and send to you? Can’t do until perhaps end of March. Can you guess a turn around time during Spring. Thank you

    1. Hi Colin,

      Yes, just like that. Make sure that you mark the threads of the turnbuckle where they intersect the turnbuckle so that we can duplicate this setting for measurement purposes. Turn around will likely be 2 weeks from when we receive your rigging, but can take up to 4 weeks depending on work flow and also parts availability. What kind of boat and what shrouds are you thinking about?

      Fill out our work request form when ready.


      1. THANKYOU. C&C 40’ ketch. Aft stay on mainmast. Port leg of a Y configuration. Perhaps more. 1st chance I’ll get it down and look over the rest. I’ll email as I send it. Thank you so much. Worst part is I’m sure I sailed past you 2 yrs ago. On the hard in the Great Lakes this winter. Colin. SV Lindsey Layne

  5. Irwin 34 Citation, 1980 original rigging…

    I need to replace for a year long cruise I’m planning… Located Fredericton New Brunswick

    Approximate Price, time to make, and install difficulty?
    Mast is already off, goes back on in 2 months

  6. I have one of your inner stay stowing units.
    An essential component, a shackle with a 50mm threaded, 10mm diameter pin, fit to a 30mm inside width and around 40mm inside depth, went overboard. Can you provide a similar shackle or tell me where I might find one?

  7. Aloha!

    Looking for terminal end of a turnbuckle with toggle. Screw size 3/8 right hand, clevis pin size on bottom of screw and on toggle is 7/16Just. looking for the screw and toggle, but will buy body if must. In SS screw.. Think open body have is chrome bronze.
    Thanks! I’ll send pix if you give me a email.
    Casey 808 385 2800

  8. What a great site! Thank you. I need a new forestay that works with my Shaefer furling system on my 27 Ericson (1974). Specs on the forestay from the manual say: 34.39′. A quote would be great or I will call you tomorrow. bob

    1. Wow, Thank you! I’ll look forward to it…..wait we aren’t open tomorrow ;-0) HA! BUT Please go ahead and give us a call anyways and leave a message we’ll get back to you Monday morning :-0)

  9. Hello, I’m looking for a solent stay retaining device. Basically looks like a semi-circular section of tubing that has a groove cut out and redirects the highfield lever to an alternate “storage” position. Any thoughts?

    1. We do make them to order. I will need to double check pricing but imagine them to be somewhere between $100-$150. Does it look something like this?
      Inner Stay Stowage Clip.
      Hope this helps. Also read here for more info on stowing your inner stay.

  10. I’m looking to create access to my 35′ Beneteau at the bow. I would like to add pelican hooks to the two starboard lifelines at the first stanchion from the pulpit. This would mean, I believe, cutting the current lifelines at the stanchion and attaching the pelican hooks on the end coming from the pulpit, and attaching d-rings at the first stanchion, or something like that. Please advise.

  11. Hi guys, I’m trying to find a source for cam cleats. I will need about 30 to start with as I am starting to manufacture a new device for sailboats. Any ideas ? All the U.S. suppliers are too expensive and don’t discount anything. Thanks Much, Gil

    1. Is there a specific manufacturer that you prefer, (i.e. Ronstan, Harken, Schaefer)? Do you require a metal or plastic jaw? Should they be sized micro, standard or off-shore? Let me know and we can give you dealer pricing on 30 cleats of your choice.


  12. I’m going to send you a photo of the current gooseneck arrangement to see if it’s suitable for a new boom.

  13. I have a Pacific Seacraft Dana 24, bought used with a Hood Stoboom. We had an “adventure” which resulted in the destruction of the mainsail. I do not want to keep the Stoboom and am planning on getting a conventionally cut main with slab reefing. Do you think the boom can be re-rigged to accommodate reefing hardware? If not, can you give some estimate of the cost of a replacement boom? I know Selden makes booms with all reefing lines lead internally, but that’s probably beyond my budget since I’m having to get a new sail and mast track, etc. All suggestions are welcome.

    David Rowan

    1. An “adventure”, sounds fun ;-0) I just quoted a new conventional boom from Selden for a 36 footer, it came in around $1100 w/o shipping. The boom included provisions for 2 reef lines and an outhaul. I know this isn’t an exact quote but should give you some point of reference. Additionally there will most likely have to be some finagling of the boom gooseneck to make it all fit.
      Is the boat near us? If so, we could come take a look, make some final recommendations, and provide an accurate quote, it’s FREE! If not, we can do it over the phone and email via pictures and measurements. Just let us know how we can help.

    2. Hi, do you have old stoboom ( Sto or stow boom Or stowboom :) ) aluminum mast track available?

      1. I have the mast track sections, mounting hardware and luff track. I don’t know the exact length, but it was sized for a 24 foot boat.

Leave a Reply to Wellington Walkin Cancel reply